Your request has been successfully submitted.

Small-Scale Wind Power Electricity Generation Training System
*
*
*
*
* Indicates required fields
 

Small-Scale Wind Power Electricity Generation Training System

8010-3

Description

The Small-Scale Wind Power Electricity Generation Training System enables students to study the complete process of wind power electricity generation directly in the classroom. The training system also covers the storage of electrical energy in batteries to ensure that it is available when there is no wind or during low wind periods.

The training system features the Wind Turbine Generator/Controller, Model 8216, and the Four-Quadrant Dynamometer/Power Supply, Model 8960-2. The Four-Quadrant Dynamometer/Power Supply is used as a prime mover in order to drive the wind turbine generator. By varying the rotation speed of the prime mover and the current through the generator windings, students can measure the generator parameters for different speeds and load values. The prime mover is also used to emulate wind blowing on the blades of a wind turbine rotor. In this mode of operation, the prime mover’s torque-speed characteristic is identical to the torque-speed characteristic that would be obtained at the wind turbine rotor for different wind speeds. This allows students to plot the typical curves of the wind turbine. Finally, the wind turbine controller can be used to adjust the charge current of a storage battery in order to maximize the amount of energy stored in the battery at any wind speed.

Features & Benefits

  • The training system teaches the basic principles of wind power electricity generation directly in the laboratory.
  • Wind speed and air density are simulated in the training system using a user-friendly and highly-configurable wind emulator.
  • All main components found in real wind turbines can be accessed separately in the Wind Turbine Generator/Controller, Model 8216.
  • The course curriculum of the Electric Power Technology Training Program is highly flexible and allows a multitude of different customized training solutions.
  • The courseware includes student manuals and instructor guides with all the theory required to perform the hands-on experiments.
  • All workstations, modules, and components are very sturdy to ensure a prolonged service life in a demanding environment such as a training laboratory.
  • The modular design approach of the training equipment allows a large variety of courses to be performed using a small number of modules, without unnecessary duplication of equipment.
  • All electrical components can be interconnected without electric shock hazard since all live parts of the connection leads are concealed and insulated.
  • All electrical symbols representing the components used in a laboratory exercise are clearly silk-screened on the front panel of the modules.
  • The training system includes a highly versatile USB peripheral:
    • Four-Quadrant Dynamometer/Power Supply, Model 8960-2. This module is used as a dc power source, as well as to simulate different wind conditions through a large variety of configurable parameters.
  • Firmware upgrades for the Four-Quadrant Dynamometer/Power Supply are available for download free of charge on the Festo Didactic website.

Topic Coverage

  • Voltage, Current, and Ohm's Law
  • Equivalent Resistance
  • Power in DC Circuits
  • Series and Parallel Circuits
  • Battery Fundamentals
  • Discharge Characteristics
  • Battery Charging Fundamentals
  • Battery Charging Methods
  • Voltage-Speed Characteristic of a Wind Turbine Generator
  • Torque-Current Characteristic of a Wind Turbine Generator
  • Power versus Wind Speed
  • Storing the Energy Produced by a Wind Turbine into Batteries

List of equipment

Qty DescriptionModel Number
1 Three-Module Workstation 8131
1 Wind Turbine Generator/Controller 8216
1 Resistive Load 8311
1 Lead-Acid Batteries 8801
1 Lead-Acid Battery Pack 8802-1
1 Connection Lead Set 8951-L
1 Four-Quadrant Dynamometer/Power Supply 8960-D
1 Electric Power Technology Training Equipment (User Guide) 38486-E
1 DC Power Circuits (Student Manual) 86350
1 DC Power Circuits (Instructor Guide) 86350-1
1 Lead-Acid Batteries (Student Manual) 86351
1 Lead-Acid Batteries (Instructor Guide) 86351-1
1 Introduction to Wind Power (Student Manual) 86353
1 Introduction to Wind Power (Instructor Guide) 86353-1

Additionally required equipment

Qty DescriptionModel Number
2 Digital Multimeter 8946-2
1 Personal Computer 8990

Optional Equipment

Qty DescriptionModel Number
1 Mobile Workstation 8110-2
1 Workstation 8134-2
1 Storage Shelves 8150-1
1 Full-Size Blank EMS Module 8160
1 Half-Size Blank EMS Module 8161
1 Wind Turbine Demonstrator 8216-D
1 Multimeters Module 8946-A
1 Small-Scale Wind Power Electricity Generation Training System (Manuals on CD-ROM) 86353-A
1 Magnetic Field Strength Indicator 86618
1 Wind Turbine Rotor 86630

Downloads


Small-Scale Wind Power El. Gen. Training System
Download Image

The above chart shows all courses in the Electric Power Technology Training Program. Blue boxes highlight courses included in the training system covered in this datasheet, while dark grey boxes, if any, highlight courses that can be optionally added to this training system.
Download Image
loading.gif

Texts that will be displayed have been partly translated by an automatic translation system.

To view any text in its original language (English), leave the mouse pointer on this text (or touch the text if you use a tablet).