Your request has been successfully submitted.

Electromechanical Training System
*
*
*
*
* Indicates required fields
 

Electromechanical Training System

8010-9

Description

The Electromechanical Training System combines a modular design approach with computer-based data acquisition and control to provide unrivaled training in electromechanical systems. Training is oriented toward today's competence requirements, including electricity fundamentals (i.e., dc power circuits), single-phase and three-phase ac power circuits, power transformers, three-phase transformer banks, permanent magnet dc motors, three-phase rotating machines (induction machine and synchronous machine), and power factor correction. The system features the Four-Quadrant Dynamometer/Power Supply, Model 8960, and the Data Acquisition and Control Interface, Model 9063, two state-of-the-art USB peripherals that greatly enhance the learning experience of students.

The courseware in the Electromechanical Training System provides students with a sound knowledge of basic electric power technology, including the operation of the permanent magnet dc motor, three-phase induction machine, and three-phase synchronous machine, three rotating machines that are commonly used in numerous applications today.

Two other rotating machine courses from the Electric Power Technology Training Program can be optionally added to the Electromechanical Training System. These courses complete student training in rotating machinery by adding knowledge of the following conventional rotating machines: separately excited, shunt, series, and compound dc motors, separately excited, shunt, and compound dc generators, universal motor, and single-phase induction motor (capacitor-start and split-phase types). These machines, although still in use today, are less common in modern applications.

Features & Benefits

  • The training system teaches the principles of three-phase rotating machines. To this end, students follow a complete curriculum that includes these topics:
    • An introduction to the fundamentals of electricity, beginning with dc power circuits and ac power circuits.
    • More advanced courses that cover different concepts and devices important to the study of three-phase rotating machines, such as single-phase and three-phase ac power circuits, single-phase and three-phase power transformers, and power factor correction.
    • Courses that cover the operation of different rotating machines, such as permanent-magnet dc motors, induction machines, and synchronous machines.
    • Optional courses that cover less common machines, such as conventional dc machines, universal motors, and single-phase induction motors.
  • The course curriculum of the Electric Power Technology Training Program is highly flexible and allows a multitude of different customized training solutions.
  • The courseware includes student manuals and instructor guides with all the theory required to perform the hands-on experiments.
  • All workstations, modules, and components are very sturdy to ensure a prolonged service life in a demanding environment such as a training laboratory.
  • The modular design approach of the training equipment allows a large variety of courses to be performed using a small number of modules, without unnecessary duplication of equipment.
  • All electrical components can be interconnected without electric shock hazard since all live parts of the connection leads are concealed and insulated.
  • All electrical symbols representing the components used in a laboratory exercise are clearly silk-screened on the front panel of the modules.
  • The training system includes two highly versatile USB peripherals:
    • Four-Quadrant Dynamometer/Power Supply, Model 8960-2. This module is used as a dc and ac power source. it can also be mechanically coupled to all rotating machines to operate as a prime mover or brake.
    • Data Acquisition and Control Interface, Model 9063. This module gives access to a large variety of computer-based measuring instruments via the LVDAC-EMS software.
  • Software upgrades for LVDAC-EMS and firmware upgrades for the Four-Quadrant Dynamometer/Power Supply and Data Acquisition and Control Interface are available for download free of charge on the Festo Didactic website.

Topic Coverage

  • Voltage, Current, and Ohm's Law
  • Equivalent Resistance
  • Power in DC Circuits
  • Series and Parallel Circuits
  • Prime Mover and Brake Operation
  • Permanent Magnet DC Motor Operating as a Generator
  • Permanent Magnet DC Motor Operating as a Motor
  • The Sine Wave
  • Phase Angle and Phase Shift
  • Instantaneous Power and Average Power
  • Inductive and Capacitive Reactance
  • Impedance
  • Active and Reactive Power
  • Apparent Power and the Power Triangle
  • Solving Simple AC Circuits using Circuit Impedance Calculation
  • Solving AC Circuits Using the Power Triangle Method
  • Voltage and Current Ratios
  • Transformer Winding Polarity and Interconnection
  • Transformer Losses, Efficiency, and Regulation
  • Transformer Rating
  • Effect of Frequency on Transformer Rating
  • The Autotransformer
  • Three-Phase Circuits
  • Three-Phase Power Measurement
  • Phase Sequence
  • Prime Mover and Brake Operation
  • The Three-Phase Squirrel Cage Induction Motor
  • Eddy-Current Brake and Asynchronous Generator
  • The Three-Phase Synchronous Motor
  • Synchronous Motor Pull-Out Torque
  • Three-Phase Synchronous Generator No-Load Operation
  • Voltage-Regulation Characteristics
  • Generator Synchronization
  • Three-Phase Transformer Configurations
  • Estimated program duration: 90 hours

List of equipment

Qty DescriptionModel Number
1 Workstation 8134-2
1 Permanent Magnet DC Motor 8213
1 Four-Pole Squirrel-Cage Induction Motor 8221-2
1 Synchronous Motor/Generator 8241-2
1 Resistive Load 8311
1 Inductive Load 8321
1 Capacitive Load 8331
1 Three-Phase Transformer Bank 8348-4
1 Transformer 8353
1 Synchronizing Module / Three-Phase Contactor 8621-A
1 Lead-Acid Battery Pack 8802-1
1 Power Supply 8823
1 Timing Belt 8942
1 Connection Lead Set 8951-L
1 Four-Quadrant Dynamometer/Power Supply 8960-C
1 Data Acquisition and Control Interface 9063-G
1 24 V AC Power Supply 30004-2
1 Power Factor Correction (Student Manual) 20116
1 Power Factor Correction (Instructor Guide) 20116-1
1 Electric Power Technology Training Equipment (User Guide) 38486-E
1 DC Power Circuits (Student Manual) 86350
1 DC Power Circuits (Instructor Guide) 86350-1
1 Permanent Magnet DC Motor (Student Manual) 86357
1 Permanent Magnet DC Motor (Instructor Guide) 86357-1
1 Single-Phase AC Power Circuits (Student Manual) 86358
1 Single-Phase AC Power Circuits (Instructor Guide) 86358-1
1 Three-Phase AC Power Circuits (Student Manual) 86360
1 Three-Phase AC Power Circuits (Instructor Guide) 86360-1
1 Three-Phase Rotating Machines (Student Manual) 86364
1 Three-Phase Rotating Machines (Instructor Guide) 86364-1
1 Single-Phase Power Transformers (Student Manual) 86377
1 Single-Phase Power Transformers (Instructor Guide) 86377-1
1 Three-Phase Transformer Banks (Student Manual) 86379
1 Three-Phase Transformer Banks (Instructor Guide) 86379-1
1 Computer-Based Instruments for EMS (User Guide) 86718-E

Additionally required equipment

Qty DescriptionModel Number
2 Digital Multimeter 8946-2
1 Personal Computer 8990
1 Training on DC Power Circuits, 0.2 day 86350-T
1 Training on Permanent Magnet DC Motor, 0.1 day 86357-T
1 Training on Single-Phase AC Power Circuits, 0.5 day 86358-T
1 Training on Three-Phase AC Power Circuits, 0.1 day 86360-T
1 Training on Three-Phase Rotating Machines, 0.4 day 86364-T
1 Training on Single-Phase Power Transformers, 0.2 day 86377-T
1 Training on Three-Phase Transformer Banks, 0.1 day 86379-T
1 Training on Computer-Based Instruments for EMS, 0.3 day 86718-T

Optional Equipment

Qty DescriptionModel Number
1 Mobile Workstation 8110-2
1 Storage Shelves 8150-1
1 Full-Size Blank EMS Module 8160
1 Half-Size Blank EMS Module 8161
1 DC Motor/Generator 8211
1 Capacitor-Start Motor 8251
1 Universal Motor 8254
1 Resistive Load 8311
1 Low-Voltage Resistive Load 8311-A
1 Power Supply 8821-2
1 Multimeters Module 8946-A
1 Textbook – Electrical Machines, Drives, and Power Systems, T. Wildi 17708
1 Installation and Commissioning of a 8010-1 System 80101-I
1 Electromechanical Training System 86357-A
1 Conventional DC Machines and Universal Motor 88943
1 Conventional DC Machines and Universal Motor 88943-1
1 Single-Phase Induction Motors 88944
1 Single-Phase Induction Motors 88944-1

Downloads

Product Fixes

Synchronizing Module / Three-Phase Contactor, Model 8621-Ax


Electromechanical Training System
Download Image

The above chart shows all courses in the Electric Power Technology Training Program. Blue boxes highlight courses included in the training system covered in this datasheet, while dark grey boxes, if any, highlight courses that can be optionally added to this training system.
Download Image
loading.gif

Texts that will be displayed have been partly translated by an automatic translation system.

To view any text in its original language (English), leave the mouse pointer on this text (or touch the text if you use a tablet).