Pneumatics Training System (6081)

Video: Fluid Power Technology at Work (AV93841-00)

This optional video tape runs for 24 minutes. It provides a broad overview of hydraulics and pneumatics applications. It covers fluid power in transportation, aviation, machining, manufacturing, mining, energy, and chemical processing industries. The ordering number is AV93841-00.

Video: Pumps, Lines, Filters (AV93843-00)

This optional video tape runs for 29 minutes. It demonstrates the operation of the various pumps found in the industry through computer animation and live-action video. Filters, hoses, and lines are also explained. The ordering number is AV93843-00.

Transparencies: Figure Transparencies of Sensors

This courseware transparency set is optional. The ordering number is TBE.

Video: Introduction to Fluid Power (AV93840-00)

This optional video tape tape runs for 19 minutes. It provides a balanced and concise overview of fluid power. It offers definitions, principles and current uses. This video also covers fluids, hydraulic and pneumatic systems. The ordering number is AV93840-00.

Video: Actuators (AV93842-00)

This optional video tape runs for 23 minutes. It explains the construction and operation of the many types of actuators used in industry. Cylinders, motors, rotators, grippers, pushers, lifters, rubbers, and bellows are all detailed. The ordering number is AV93842-00.

Video: Control Mechanisms (AV93844-00)

This optional video tape runs for 27 minutes. It summarizes the many ways to control fluid power systems. The construction and operation of pilot valves, solenoid valves, sensors, PLCs, and other devices are clearly explained. The ordering number is AV93844-00.

Transparencies: Figure Transparencies of Pneumatics Fundamentals (31290-MO)

The courseware transparency set is optional. The ordering number is .

Transparencies: Figure Transparencies of Electrical Control of Pneumatic Systems (31290-MO)

The courseware transparency set is optional. The ordering number is 31290-MO.

Transparencies: Figure Transparencies of Pneumatics Applications - PLC (31726-MO)

The courseware transparency set is optional. The ordering number is 31726-MO.

Transparencies: Figure Transparencies of Servo/Proportional Control of Pneumatic Systems (31977-MO)

This courseware transparency set is optional. The ordering number is 31977-MO.

Electrical Control of Pneumatics Systems (6081-2)

These components are used to introduce students to electrical control of pneumatic systems using ladder diagrams. Through hands-on experimentation, students gain familiarity with functional and industrial electrically controlled pneumatic systems while learning systematic methods of troubleshooting and testing electrically controlled pneumatic systems.

Programmable Logic Controller (6082-5)

The 6082-5 PLC is an advanced Allen Bradley unit that is provided with a computer interface.

Using the PLC with either the Hydraulics or Pneumatics Training System, students learn how to send instructions from the PLC and download ladder programs in order to operate fluid power circuits by means of switches, sensors and solenoid-operated directional valves. The PLC also allows students to make comparisons with relay-operated control circuits and design time-delay circuits, up and down counting circuits, latch and unlatch circuits, and more.

The system consists of a PLC equipped with input/output 2-mm banana sockets, allowing quick interconnection to components, along with curriculum.

Hydraulics & Pneumatics Applications - PLC (6082)

With a PLC connected to either the Hydraulics or Pneumatics Training System, students learn how to send instructions from the PLC and download ladder programs in order to operate fluid power circuits by means of switches, sensors, and solenoid-operated directional valves. The PLC further allows students to make comparisons to relay-controlled fluid power circuits and design time-delay circuits, up and down counting circuits, latch and unlatch circuits, and more. The system consists of a PLC interfaced to accept leads terminated with 2-mm banana plugs allowing quick interconnection to components, along with a hand-held programmer, programming software, an expansion work surface, and curriculum.

Electronic Sensors Set (6085-A)

The Sensors module is an add-on to the Electrical Control systems for both Hydraulics and Pneumatics. This system introduces students to the operating characteristics of six types of photoelectric and proximity sensors representative of those found in industry.

For details, please click here.

Pneumatic Servo/Proportional Control (6081-4)

The Servo/Proportional Control module is an add-on to the Electrical Control system for Pneumatics. Through hands-on operation of signal conditioners, pressure and position transducers, P.I.D. controllers, proportional directional control valve, feedback devices and corresponding interface hardware and courseware, students are trained in the precise controls used in industrial applications such as robotics, aviation, CNC machines, marine, mobile equipment, and material handling.

This advanced fluid control application requires no additional floor space.

Programmable Logic Controller (PLC; 6082-1)

The 6082-1 PLC is an Allen Bradley unit that is provided with a teach pendant.

Using the PLC with either the Hydraulics or Pneumatics Training System, students learn how to send instructions from the PLC and download ladder programs in order to operate fluid power circuits by means of switches, sensors and solenoid-operated directional valves. The PLC also allows students to make comparisons with relay-operated control circuits and design time-delay circuits, up and down counting circuits, latch and unlatch circuits, and more.

The system consists of a PLC equipped with input/output 2-mm banana sockets, allowing quick interconnection to components, along with a hand-held programmer, an expansion work surface and curriculum.